You should change your password to something different as soon as possible. Choose the “Change Password” command in the Admin menu to change your password.[.KC-405.]
There is currently another KeyConfigure connected to the same KeyServer. You will have read-only access to the KeyServer. If you need full access, please try again later. (^1)[.KC-545.]
There is currently another KeyConfigure connected to the same KeyServer. Would you like to forcibly terminate the other session? (^1)[.KC-540.]
You are currently running KeyConfigure on a machine that is also running KeyServer. Do you wish to access this local server, or would you like to access the KeyServer you have Chosen with KeyAccess?[.KC-530.]
There was an error while changing the assistant’s privileges. The old privileges may still be in effect.[.KC-415.]
There was an error while changing your password. Your old KeyConfigure password may still be in effect.[.KC-410.]
You have mistyped your KeyConfigure password. If you do not know your password, please consult the KeyConfigure user manual.[.KC-400.]
You have failed to type the correct password, so you will not be able to access the KeyServer.[.KC-390.]
That is not the right password.
Check the caps lock key and try again.[.KC-380.]
A communication socket could not be opened between KeyConfigure and the KeyServer. Please open the Chooser and make sure that AppleTalk is active.[.KC-80.]
The Active Controls file is corrupted. You may view and copy the Active Controls. Consider restoring the Active Controls file from a backup copy.[.KC-75.]
KeyConfigure could not download all of the Control information. This could be due to heavy network traffic or a busy KeyServer. Choose “Connect” in the File menu if you want to try again.[.KC-70.]
A KeyServer has been found, but is not answering. You may be trying to connect to an incompatible version of the KeyServer. Switch to a compatible KeyConfigure, or use the Chooser to select a different KeyServer.[.KC-65.]
The KeyServer you are trying to connect to is incompatible with this copy of KeyConfigure. Switch to a compatible KeyConfigure, or use the Chooser to select a different KeyServer.[.KC-60.]
The KeyAccess driver required by KeyConfigure could not be found. You must put the “KeyAccess” file into the active System Folder and restart your Macintosh.[.KC-50.]
The KeyServer could not be located. Select “Chooser” from the apple menu ⌃, click on the “KeyAccess” icon, and select a KeyServer.[.KC-30.]
